NetBSD Problem Report #2649

From gnats  Tue Jul 23 02:59:45 1996
Received: from uran.informatik.uni-bonn.de by pain.lcs.mit.edu (8.7.5/8.7.3) with ESMTP id CAA27705 for <gnats-bugs@gnats.netbsd.org>; Tue, 23 Jul 1996 02:53:43 -0400 (EDT)
Message-Id: <199607230651.IAA00305@beverly.rhein.de>
Date: Tue, 23 Jul 1996 08:51:10 +0200 (MET DST)
From: Ignatios Souvatzis <is@beverly.rhein.de>
Reply-To: is@netbsd.org
To: gnats-bugs@NetBSD.ORG
Cc: kstailey@leidecker.gsfc.nasa.gov (FYI),
        neil@crash.drempel.org.uk (Neil Brewitt)
Subject: A3000 hangs when attaching HP Scanjet IIcx
X-Send-Pr-Version: 3.95

>Number:         2649
>Category:       port-amiga
>Synopsis:       A3000 hangs when attaching HP Scanjet IIcx
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    port-amiga-maintainer
>State:          closed
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Jul 23 03:05:04 +0000 1996
>Closed-Date:    Thu Jan 07 14:56:57 +0000 2021
>Last-Modified:  Thu Jan 07 14:56:57 +0000 2021
>Originator:     Ignatios Souvatzis
>Release:        1.2_BETA
>Organization:
>Environment:

System: NetBSD beverly.rhein.de 1.2_BETA NetBSD 1.2_BETA (GENERIC) #42: Sun Jul 14 14:34:45 MET DST 1996 is@jocelyn.rhein.de:/bulk/s2/src/sys/arch/amiga/compile/GENERIC amiga


>Description:
	My A3000 hangs when attaching to a HP Scanjet II cx.
	This happens right after the string "scan0: HP ScanJet IIcx" is
	printed to the console. The SCSI bus busy LED stays lighted.

	Yes, the SCSI bus was properly terminated. The same scanner works
	fine with NetBSD-1.2_BETA on a i486 machine it is normally connected
	to via an Adaptec 2940 interface.

	I booted into the debugger and tried to toggle several of the sbic.c
	switches (sbic_enable_reselect=0, sbic_no_dma=1,
	sbic_parallel_operations=0), without any change in behaviour.

	I guess I'm a victim of the remaining 1% of bugs in the Amiga sbic.c
	driver after the last big change just before -1.1.

	Note that there is another report (although not as a formal PR to us)
	from neil@crash.drempel.org.uk (Neil Brewitt). He tried to use a 
	MUSTEK 6000 with an A3000. His scenario is a bit different: The machine
	survives the auto-configure period, then any process trying to talk
	to the Mustek hangs in "disk wait" (D).

>How-To-Repeat:
	Connect HP Scanjet to built-in SCSI interface; reboot.
>Fix:
	Fix: not known.
	Workaround: switch scanner off before booting and don't use it.
>Release-Note:
>Audit-Trail:
Responsible-Changed-From-To: gnats-admin->port-amiga-maintainer 
Responsible-Changed-By: fair 
Responsible-Changed-When: Mon Dec 28 09:33:48 PST 1998 
Responsible-Changed-Why:  
This PR is the responsibility of the portmaster, 
not the GNATS database administrator. 
State-Changed-From-To: open->feedback
State-Changed-By: maya@NetBSD.org
State-Changed-When: Sun, 04 Mar 2018 12:29:08 +0000
State-Changed-Why:
Need re-test with backtrace. Your own fix to PR 8571 suggests this is already fixed.


State-Changed-From-To: feedback->closed
State-Changed-By: maya@NetBSD.org
State-Changed-When: Thu, 07 Jan 2021 14:56:57 +0000
State-Changed-Why:
Assuming fixed based on PR 8571 being fixed.


>Unformatted:

Home	PR Database Search