NetBSD Problem Report #57654

From www@netbsd.org  Wed Oct 11 20:41:57 2023
Return-Path: <www@netbsd.org>
Received: from mail.netbsd.org (mail.netbsd.org [199.233.217.200])
	(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits))
	(Client CN "mail.NetBSD.org", Issuer "mail.NetBSD.org CA" (not verified))
	by mollari.NetBSD.org (Postfix) with ESMTPS id 33CC81A9238
	for <gnats-bugs@gnats.NetBSD.org>; Wed, 11 Oct 2023 20:41:57 +0000 (UTC)
Message-Id: <20231011204155.20DFF1A923A@mollari.NetBSD.org>
Date: Wed, 11 Oct 2023 20:41:55 +0000 (UTC)
From: iwama@t3.rim.or.jp
Reply-To: iwama@t3.rim.or.jp
To: gnats-bugs@NetBSD.org
Subject: Indy R5000SC not supported after 9.1
X-Send-Pr-Version: www-1.0

>Number:         57654
>Category:       port-sgimips
>Synopsis:       Indy R5000SC not supported after 9.1
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-sgimips-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Oct 11 20:45:00 +0000 2023
>Last-Modified:  Wed Aug 07 20:55:00 +0000 2024
>Originator:     Yoshihiko Iwama
>Release:        9.1
>Organization:
>Environment:
>Description:
My Indy with an R5000SC CPU cannot boot from the installation CD of 9.1 or later.

>> hinv
                   System: IP22
                Processor: 150 Mhz R5000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 512 Kbytes
              Memory size: 256 Mbytes
                 Graphics: Indy 24-bit
                SCSI Disk: scsi(0)disk(1)
                SCSI Disk: scsi(0)disk(2)
               SCSI CDROM: scsi(0)cdrom(6)
                    Audio: Iris Audio Processor: version A2 revision 4.1.0
>> version
PROM Monitor SGI Version 5.3 Rev B10 R4X00/R5000 IP24 Feb 12, 1996 (BE)
>> boot -f scsi(0)cdrom(6)rdisk(0)partition(8)ip2xboot

NetBSD/sgimips 9.3 Bootstrap, Revision 1.5 (Thu Aug  4 15:30:37 UTC 2022)

devopen: scsi(0)cdrom(6)rdisk(0)partition(0) type scsi file ip2x
6845776+112432=0x6a30d8
[   1.0000000] phys segment: 0xe000 @ 0x8002000
[   1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
[   1.0000000] phys segment: 0x730000 @ 0x8010000
[   1.0000000] adding 0x58000 @ 0x8010000 to freelist 0
[   1.0000000] adding 0x3c000 @ 0x8704000 to freelist 0
[   1.0000000] phys segment: 0xf800000 @ 0x8800000
[   1.0000000] adding 0xf800000 @ 0x8800000 to freelist 0
(stop here)

This Indy can be booted from the installation CD of 9.0 or earlier.

>> boot -f scsi(0)cdrom(6)rdisk(0)partition(8)ip2xboot

NetBSD/sgimips 9.0 Bootstrap, Revision 1.5 (Fri Feb 14 00:06:28 UTC 2020)

devopen: scsi(0)cdrom(6)rdisk(0)partition(0) type scsi file ip2x
6829936+112368=0x69f2b8
[   1.0000000] phys segment: 0xe000 @ 0x8002000
[   1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
[   1.0000000] phys segment: 0x730000 @ 0x8010000
[   1.0000000] adding 0x58000 @ 0x8010000 to freelist 0
[   1.0000000] adding 0x40000 @ 0x8700000 to freelist 0
[   1.0000000] phys segment: 0xf800000 @ 0x8800000
[   1.0000000] adding 0xf800000 @ 0x8800000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.0 (INSTALL32_IP2x) #0: Fri Feb 14 00:06:28 UTC 2020
[   1.0000000] 	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/sgimips/compile/INSTALL32_IP2x
[   1.0000000] total memory = 256 MB
[   1.0000000] (768 KB reserved for ARCS)
[   1.0000000] avail memory = 243 MB
[   1.0000000] mainbus0 (root): SGI-IP22 [SGI, 6909ab88], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2310) Rev. 1.0 with built-in FPU Rev. 1.0
[   1.0000000] cpu0: 48 TLB entries, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 data cache
[   1.0000000] int0 at mainbus0 addr 0x1fbd9880
[   1.0000000] int0: bus 75MHz, CPU 150MHz
[   1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
[   1.0000000] gio0 at imc0
[   1.0000000] newport0 at gio0: SGI NG1 (board revision 4, cmap revision 7, xmap revision 7, vc2 revision 0), depth 8
[   1.0000000] wsdisplay0 at newport0 kbdmux 1
[   1.0000000] hpc0 at gio0: SGI HPC3 (onboard)
[   1.0000000] zsc0 at hpc0 offset 0x59830
[   1.0000000] zstty0 at zsc0 channel 1 (console i/o)
[   1.0000000] zstty1 at zsc0 channel 0
[   1.0000000] pckbc0 at hpc0 offset 0x59840
[   1.0000000] pckbd0 at pckbc0 (kbd slot)
[   1.0000000] wskbd0 at pckbd0 mux 1
[   1.0000000] pms0 at pckbc0 (aux slot)
[   1.0000000] wsmouse0 at pms0 mux 0
[   1.0000000] sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
[   1.0000000] sq0: Ethernet address 08:00:69:09:ab:88
[   1.0000000] wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
[   1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
[   1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
[   1.0000000] haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
[   1.0000000] audio0 at haltwo0: playback
[   1.0000000] audio0: slinear_be:16 2ch 48000Hz, blk 21ms for playback
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] pi1ppc0 at hpc0 offset 0x59800
[   1.0000000] pi1ppc0: capabilities=0x8<PS2>
[   1.0000000] pi1ppc0: child devices not configured
[   1.0000000] button0 at hpc0 offset 0x59850
[   1.0000000] dsclock0 at mainbus0 addr 0x1fbe0000
[   1.0000000] ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy (Guinness), board rev 0
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   3.0690969] sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST52160N, 0285> disk fixed
[   3.1593397] sd0: 2069 MB, 6536 cyl, 4 head, 162 sec, 512 bytes/sect x 4238282 sectors
[   3.2534624] sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers
[   4.3460918] cd0 at scsibus0 target 6 lun 0: <PLEXTOR, CD-ROM PX-32TS, 1.02> cdrom removable
[   4.4481358] cd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers
[  14.7807670] boot device: <unknown>
[  14.8233305] root on md0a dumps on md0b
[  14.8651394] root file system type: ffs
[  14.9132767] kern.module.path=/stand/sgimips/9.0/modules
Created mfs /dev (282624 byte, 480 inodes)
-sh: tset: not found
erase ^?, werase ^W, kill ^U, intr ^C
>How-To-Repeat:
Booting from the 9.1 or later installation CD always fails.
>Fix:
Among the differences between 9.0 and 9.1, I thought that PR/55139 was related. Therefore, I replaced the 3 files of this PR with the 9.0 ones and created an installation CD. I was able to successfully boot from this installation CD.

>> hinv
                   System: IP22
                Processor: 150 Mhz R5000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 512 Kbytes
              Memory size: 256 Mbytes
                 Graphics: Indy 24-bit
                SCSI Disk: scsi(0)disk(1)
               SCSI CDROM: scsi(0)cdrom(6)
                    Audio: Iris Audio Processor: version A2 revision 4.1.0
>> version
PROM Monitor SGI Version 5.3 Rev B10 R4X00/R5000 IP24 Feb 12, 1996 (BE)
>> boot -f scsi(0)cdrom(6)partition(8)ip2xboot

NetBSD/sgimips 9.1 Bootstrap, Revision 1.5 (Wed Oct 11 17:23:46 UTC 2023)

devopen: scsi(0)cdrom(6)partition(0) type scsi file ip2x
6840848+112416=0x6a1d88
[   1.0000000] phys segment: 0xe000 @ 0x8002000
[   1.0000000] adding 0xe000 @ 0x8002000 to freelist 0
[   1.0000000] phys segment: 0x730000 @ 0x8010000
[   1.0000000] adding 0x58000 @ 0x8010000 to freelist 0
[   1.0000000] adding 0x3e000 @ 0x8702000 to freelist 0
[   1.0000000] phys segment: 0xf800000 @ 0x8800000
[   1.0000000] adding 0xf800000 @ 0x8800000 to freelist 0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.1 (INSTALL32_IP2x) #0: Thu Oct 12 02:53:53 JST 2023
[   1.0000000] 	iwama@netbsd-v.led.t3.rim.or.jp:/home/iwama/NetBSD-9.1-sgimips-indy/usr/obj/sys/arch/sgimips/compile/INSTALL32_IP2x
[   1.0000000] total memory = 256 MB
[   1.0000000] (768 KB reserved for ARCS)
[   1.0000000] avail memory = 243 MB
[   1.0000000] mainbus0 (root): SGI-IP22 [SGI, 6909ab88], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2310) Rev. 1.0 with built-in FPU Rev. 1.0
[   1.0000000] cpu0: 48 TLB entries, 16MB max page size
[   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
[   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
[   1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 data cache
[   1.0000000] int0 at mainbus0 addr 0x1fbd9880
[   1.0000000] int0: bus 75MHz, CPU 150MHz
[   1.0000000] imc0 at mainbus0 addr 0x1fa00000: revision 3
[   1.0000000] gio0 at imc0
[   1.0000000] newport0 at gio0: SGI NG1 (board revision 4, cmap revision 7, xmap revision 7, vc2 revision 0), depth 8
[   1.0000000] wsdisplay0 at newport0 kbdmux 1
[   1.0000000] hpc0 at gio0: SGI HPC3 (onboard)
[   1.0000000] zsc0 at hpc0 offset 0x59830
[   1.0000000] zstty0 at zsc0 channel 1 (console i/o)
[   1.0000000] zstty1 at zsc0 channel 0
[   1.0000000] pckbc0 at hpc0 offset 0x59840
[   1.0000000] pckbd0 at pckbc0 (kbd slot)
[   1.0000000] wskbd0 at pckbd0 mux 1
[   1.0000000] pms0 at pckbc0 (aux slot)
[   1.0000000] wsmouse0 at pms0 mux 0
[   1.0000000] sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
[   1.0000000] sq0: Ethernet address 08:00:69:09:ab:88
[   1.0000000] wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
[   1.0000000] wdsc0: microcode revision 0x0d, Fast SCSI
[   1.0000000] scsibus0 at wdsc0: 8 targets, 8 luns per target
[   1.0000000] haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
[   1.0000000] audio0 at haltwo0: playback
[   1.0000000] audio0: slinear_be:16 2ch 48000Hz, blk 4096 bytes (21.3ms) for playback
[   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000000] wsbell at spkr0 not configured
[   1.0000000] pi1ppc0 at hpc0 offset 0x59800
[   1.0000000] pi1ppc0: capabilities=0x8<PS2>
[   1.0000000] pi1ppc0: child devices not configured
[   1.0000000] button0 at hpc0 offset 0x59850
[   1.0000000] dsclock0 at mainbus0 addr 0x1fbe0000
[   1.0000000] ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy (Guinness), board rev 0
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   3.0692057] sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST52160N, 0285> disk fixed
[   3.1543162] sd0: 2069 MB, 6536 cyl, 4 head, 162 sec, 512 bytes/sect x 4238282 sectors
[   3.2494836] sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers
[   4.3421162] cd0 at scsibus0 target 6 lun 0: <PLEXTOR, CD-ROM PX-32TS, 1.02> cdrom removable
[   4.4439505] cd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers
[  14.7765771] boot device: <unknown>
[  14.8191449] root on md0a dumps on md0b
[  14.8609477] root file system type: ffs
[  14.9090812] kern.module.path=/stand/sgimips/9.1/modules
Created mfs /dev (282624 byte, 480 inodes)
-sh: tset: not found
erase ^?, werase ^W, kill ^U, intr ^C

Is the change in PR/55139 a problem specific to the model I own?

>Audit-Trail:
From: <iwama@t3.rim.or.jp>
To: <gnats-bugs@NetBSD.org>
Cc: 
Subject: Re: port-sgimips/57654
Date: Wed, 3 Jul 2024 13:07:10 +0900

 I tried it on O2 with R5000SC 200MHz, with similar results as Indy R5000SC
 150MHz.
 That is, O2 boots from the 9.0 installation CD, but not from 9.1.
 Note that after a failed boot on 9.1 or later, the LED will turn amber.

 > hinv
                    System: IP32
                 Processor: 200 Mhz R5000, with FPU
      Primary I-cache size: 32 Kbytes
      Primary D-cache size: 32 Kbytes
      Secondary cache size: 1024 Kbytes
               Memory size: 256 Mbytes
                  Graphics: CRM, Rev C
                     Audio: A3 version 1
                 SCSI Disk: scsi(0)disk(1)
                 SCSI Disk: scsi(0)disk(2)
                SCSI CDROM: scsi(0)cdrom(4)
 > version


 PROM Monitor (BE)
 Tue Oct 22 10:58:00 PDT 2002 
 VERSION 4.18
 O2 R5K/R7K/R10K/R12K
 IRIX 6.5.x IP32prom IP32PROM-v4

 > boot -f scsi(0)disk(1)rdisk(0)partition(8)sash
 scsi(0)disk(1)rdisk(0)partition(0)NetBSD/9.1/netbsd-INSTALL32_IP3x
 136992+22896+3248+341792+49584d+4620+6880 entry: 0x8ffa5e50
 11845456+131856 entry: 0x80069000
 [   1.0000000] phys segment: 0x5e000 @ 0x2000
 [   1.0000000] adding 0x5e000 @ 0x2000 to freelist 0
 [   1.0000000] phys segment: 0xb6c000 @ 0x60000
 [   1.0000000] adding 0x6000 @ 0x60000 to freelist 0
 [   1.0000000] skipping 0xb66000 @ 0x66000 (kernel)
 [   1.0000000] phys segment: 0x182000 @ 0xbce000
 [   1.0000000] adding 0x182000 @ 0xbce000 to freelist 0
 [   1.0000000] phys segment: 0xeb84000 @ 0x1400000
 [   1.0000000] adding 0xeb84000 @ 0x1400000 to freelist 0
 [   1.0000000] phys segment: 0x7c000 @ 0xff84000
 [   1.0000000] adding 0x7c000 @ 0xff84000 to freelist 0
 (freezed here)


 > boot -f scsi(0)disk(1)rdisk(0)partition(8)sash
 scsi(0)disk(1)rdisk(0)partition(0)NetBSD/9.0/netbsd-INSTALL32_IP3x
 136992+22896+3248+341792+49584d+4620+6880 entry: 0x8ffa5e50
 11815376+131840 entry: 0x80069000
 [   1.0000000] phys segment: 0x5e000 @ 0x2000
 [   1.0000000] adding 0x5e000 @ 0x2000 to freelist 0
 [   1.0000000] phys segment: 0xb64000 @ 0x60000
 [   1.0000000] adding 0x6000 @ 0x60000 to freelist 0
 [   1.0000000] skipping 0xb5e000 @ 0x66000 (kernel)
 [   1.0000000] phys segment: 0x18a000 @ 0xbc6000
 [   1.0000000] adding 0x18a000 @ 0xbc6000 to freelist 0
 [   1.0000000] phys segment: 0xeb84000 @ 0x1400000
 [   1.0000000] adding 0xeb84000 @ 0x1400000 to freelist 0
 [   1.0000000] phys segment: 0x7c000 @ 0xff84000
 [   1.0000000] adding 0x7c000 @ 0xff84000 to freelist 0
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights
 reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights
 reserved.

 [   1.0000000] NetBSD 9.0 (INSTALL32_IP3x) #0: Fri Feb 14 00:06:28 UTC 2020
 [   1.0000000]
 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/sgimips/compile/INSTALL32_IP3x
 [   1.0000000] total memory = 255 MB
 [   1.0000000] (6848 KB reserved for ARCS)
 [   1.0000000] avail memory = 235 MB
 [   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 0], 1 processor
 [   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with
 built-in FPU Rev. 1.0
 [   1.0000000] cpu0: 48 TLB entries, 16MB max page size
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
 [   1.0000000] cpu0: 1024KB/32B direct-mapped write-through L2 unified cache
 [   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
 [   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics
 Display Engine
 [   1.0000000] crmfb0: device unusable if not setup by firmware
 [   1.0000000] mace0 at mainbus0 addr 0x1f000000
 [   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
 [   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000:
 ns16550a, working fifo
 [   1.0000000] com0: console
 [   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000:
 ns16550a, working fifo
 [   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2
 controller
 [   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
 [   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110
 Ethernet, rev 1
 [   1.0000000] mec0: Ethernet address 08:00:69:05:a4:60
 [   1.0000000] nsphy0 at mec0 phy 31: DP83840 10/100 media interface, rev. 1
 [   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
 100baseT4, auto
 [   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843
 rev 1
 [   1.0000000] audio0 at mavb0: playback
 [   1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 40ms
 for playback
 [   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
 [   1.0000000] wsbell at spkr0 not configured
 [   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
 [   1.0000000] pci0 at macepci0 bus 0
 [   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc0: interrupting at crime interrupt 8
 [   1.0000000] ahc0: Using left over BIOS settings
 [   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
 [   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc1: interrupting at crime interrupt 9
 [   1.0000000] ahc1: Using left over BIOS settings
 [   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
 [   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
 [   1.0716421] scsibus1: waiting 2 seconds for devices to settle...
 [   3.1338890] sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAN3184MC, 0108>
 disk fixed
 [   3.2252320] sd0: 17366 MB, 30050 cyl, 2 head, 591 sec, 512 bytes/sect x
 35566483 sectors
 [   3.3233646] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.4230806] sd1 at scsibus0 target 2 lun 0: <MAXTOR, ATLAS10K5_73SCA,
 JS03> disk fixed
 [   3.5177480] sd1: 69809 MB, 81782 cyl, 2 head, 874 sec, 512 bytes/sect x
 142969680 sectors
 [   3.6180813] sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.9888445] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5401TA,
 3605> cdrom removable
 [   4.1016871] cd0: sync (236.00ns offset 15), 8-bit (4.237MB/s) transfers
 [  11.0357456] WARNING: 1 error while detecting hardware; check system log.
 [  11.1164956] boot device: sd0
 [  11.1610577] root on md0a dumps on md0b
 [  11.2086529] root file system type: ffs
 [  11.2568358] kern.module.path=/stand/sgimips/9.0/modules
 [  11.3196714] WARNING: clock lost 8809 days
 [  11.3678488] WARNING: using filesystem time
 [  11.4170792] WARNING: CHECK AND RESET THE DATE!
 Created mfs /dev (282624 byte, 480 inodes)
 -sh: tset: not found
 erase ^?, werase ^W, kill ^U, intr ^C

 Also, after replacing the 3 files modified in PR#55139 with the 9.0 ones, O2
 boots even from the 9.1 installation CD.

 > boot -f scsi(0)cdrom(4)partition(8)ip3xboot
 54464+1792 entry: 0x80002000

 NetBSD/sgimips 9.1 Bootstrap, Revision 1.5 (Wed Oct 11 17:23:46 UTC 2023)

 devopen: scsi(0)cdrom(4)partition(0) type scsi file ip3x
 11845872+131824=0xb6c878
 [   1.0000000] phys segment: 0xe000 @ 0x2000
 [   1.0000000] adding 0xe000 @ 0x2000 to freelist 0
 [   1.0000000] phys segment: 0xd40000 @ 0x10000
 [   1.0000000] adding 0x56000 @ 0x10000 to freelist 0
 [   1.0000000] adding 0x182000 @ 0xbce000 to freelist 0
 [   1.0000000] phys segment: 0xec00000 @ 0x1400000
 [   1.0000000] adding 0xec00000 @ 0x1400000 to freelist 0
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights
 reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights
 reserved.

 [   1.0000000] NetBSD 9.1 (INSTALL32_IP3x) #0: Thu Oct 12 02:55:22 JST 2023
 [   1.0000000]
 iwama@netbsd-v.led.t3.rim.or.jp:/home/iwama/NetBSD-9.1-sgimips-indy/usr/obj/
 sys/arch/sgimips/compile/INSTALL32_IP3x
 [   1.0000000] total memory = 255 MB
 [   1.0000000] (6848 KB reserved for ARCS)
 [   1.0000000] avail memory = 235 MB
 [   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 0], 1 processor
 [   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with
 built-in FPU Rev. 1.0
 [   1.0000000] cpu0: 48 TLB entries, 16MB max page size
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
 [   1.0000000] cpu0: 1024KB/32B direct-mapped write-through L2 unified cache
 [   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
 [   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics
 Display Engine
 [   1.0000000] crmfb0: device unusable if not setup by firmware
 [   1.0000000] mace0 at mainbus0 addr 0x1f000000
 [   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
 [   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000:
 ns16550a, working fifo
 [   1.0000000] com0: console
 [   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000:
 ns16550a, working fifo
 [   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2
 controller
 [   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
 [   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110
 Ethernet, rev 1
 [   1.0000000] mec0: Ethernet address 08:00:69:05:a4:60
 [   1.0000000] nsphy0 at mec0 phy 31: DP83840 10/100 media interface, rev. 1
 [   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
 100baseT4, auto
 [   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843
 rev 1
 [   1.0000000] audio0 at mavb0: playback
 [   1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 3840
 bytes (10ms) for playback
 [   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
 [   1.0000000] wsbell at spkr0 not configured
 [   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
 [   1.0000000] pci0 at macepci0 bus 0
 [   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc0: interrupting at crime interrupt 8
 [   1.0000000] ahc0: Using left over BIOS settings
 [   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
 [   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc1: interrupting at crime interrupt 9
 [   1.0000000] ahc1: Using left over BIOS settings
 [   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
 [   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
 [   1.0716207] scsibus1: waiting 2 seconds for devices to settle...
 [   3.1338656] sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAN3184MC, 0108>
 disk fixed
 [   3.2250875] sd0: 17366 MB, 30050 cyl, 2 head, 591 sec, 512 bytes/sect x
 35566483 sectors
 [   3.3233260] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.4230386] sd1 at scsibus0 target 2 lun 0: <MAXTOR, ATLAS10K5_73SCA,
 JS03> disk fixed
 [   3.5177076] sd1: 69809 MB, 81782 cyl, 2 head, 874 sec, 512 bytes/sect x
 142969680 sectors
 [   3.6180393] sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.9886950] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5401TA,
 3605> cdrom removable
 [   4.1015337] cd0: sync (236.00ns offset 15), 8-bit (4.237MB/s) transfers
 [  16.0253745] WARNING: 1 error while detecting hardware; check system log.
 [  16.1071668] boot device: <unknown>
 [  16.1480027] root on md0a dumps on md0b
 [  16.1898947] root file system type: ffs
 [  16.2380823] kern.module.path=/stand/sgimips/9.1/modules
 [  16.3009134] WARNING: clock lost 10145 days
 [  16.3501358] WARNING: using filesystem time
 [  16.3993676] WARNING: CHECK AND RESET THE DATE!
 Created mfs /dev (282624 byte, 480 inodes)
 -sh: tset: not found
 erase ^?, werase ^W, kill ^U, intr ^C


From: <iwama@t3.rim.or.jp>
To: <gnats-bugs@NetBSD.org>
Cc: 
Subject: Re: port-sgimips/57654
Date: Thu, 8 Aug 2024 05:49:56 +0900

 Additionally I tried the O2 R5000SC 180MHz with similar results to the O2
 R5000SC 200MHz and the Indy R5000SC 150MHz.
 That is, O2 boots from the 9.0 installation CD, but not from 9.1.
 Note that after a failed boot on 9.1 or later, the LED will turn amber.

 > hinv
                    System: IP32
                 Processor: 180 Mhz R5000, with FPU
      Primary I-cache size: 32 Kbytes
      Primary D-cache size: 32 Kbytes
      Secondary cache size: 512 Kbytes
               Memory size: 256 Mbytes
                  Graphics: CRM, Rev C
                     Audio: A3 version 1
                 SCSI Disk: scsi(0)disk(1)
                 SCSI Disk: scsi(0)disk(2)
                SCSI CDROM: scsi(0)cdrom(4)
 > version


 PROM Monitor (BE)
 Tue Oct 22 10:58:00 PDT 2002 
 VERSION 4.18
 O2 R5K/R7K/R10K/R12K
 IRIX 6.5.x IP32prom IP32PROM-v4

 > boot -f scsi(0)disk(1)rdisk(0)partition(8)sash
 scsi(0)disk(1)rdisk(0)partition(0)NetBSD/9.1/netbsd-INSTALL32_IP3x
 136992+22896+3248+341792+49584d+4620+6880 entry: 0x8ffa5e50
 11845456+131856 entry: 0x80069000
 [   1.0000000] phys segment: 0x5e000 @ 0x2000
 [   1.0000000] adding 0x5e000 @ 0x2000 to freelist 0
 [   1.0000000] phys segment: 0xb6c000 @ 0x60000
 [   1.0000000] adding 0x6000 @ 0x60000 to freelist 0
 [   1.0000000] skipping 0xb66000 @ 0x66000 (kernel)
 [   1.0000000] phys segment: 0x182000 @ 0xbce000
 [   1.0000000] adding 0x182000 @ 0xbce000 to freelist 0
 [   1.0000000] phys segment: 0xeb84000 @ 0x1400000
 [   1.0000000] adding 0xeb84000 @ 0x1400000 to freelist 0
 [   1.0000000] phys segment: 0x7c000 @ 0xff84000
 [   1.0000000] adding 0x7c000 @ 0xff84000 to freelist 0
 (freezed here)

 > boot -f scsi(0)disk(1)rdisk(0)partition(8)sash
 scsi(0)disk(1)rdisk(0)partition(0)NetBSD/9.0/netbsd-INSTALL32_IP3x
 136992+22896+3248+341792+49584d+4620+6880 entry: 0x8ffa5e50
 11815376+131840 entry: 0x80069000
 [   1.0000000] phys segment: 0x5e000 @ 0x2000
 [   1.0000000] adding 0x5e000 @ 0x2000 to freelist 0
 [   1.0000000] phys segment: 0xb64000 @ 0x60000
 [   1.0000000] adding 0x6000 @ 0x60000 to freelist 0
 [   1.0000000] skipping 0xb5e000 @ 0x66000 (kernel)
 [   1.0000000] phys segment: 0x18a000 @ 0xbc6000
 [   1.0000000] adding 0x18a000 @ 0xbc6000 to freelist 0
 [   1.0000000] phys segment: 0xeb84000 @ 0x1400000
 [   1.0000000] adding 0xeb84000 @ 0x1400000 to freelist 0
 [   1.0000000] phys segment: 0x7c000 @ 0xff84000
 [   1.0000000] adding 0x7c000 @ 0xff84000 to freelist 0
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights
 reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights
 reserved.

 [   1.0000000] NetBSD 9.0 (INSTALL32_IP3x) #0: Fri Feb 14 00:06:28 UTC 2020
 [   1.0000000]
 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/sgimips/compile/INSTALL32_IP3x
 [   1.0000000] total memory = 255 MB
 [   1.0000000] (6848 KB reserved for ARCS)
 [   1.0000000] avail memory = 235 MB
 [   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 0], 1 processor
 [   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with
 built-in FPU Rev. 1.0
 [   1.0000000] cpu0: 48 TLB entries, 16MB max page size
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
 [   1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 unified cache
 [   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
 [   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics
 Display Engine
 [   1.0000000] crmfb0: device unusable if not setup by firmware
 [   1.0000000] mace0 at mainbus0 addr 0x1f000000
 [   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
 [   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000:
 ns16550a, working fifo
 [   1.0000000] com0: console
 [   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000:
 ns16550a, working fifo
 [   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2
 controller
 [   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
 [   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110
 Ethernet, rev 1
 [   1.0000000] mec0: Ethernet address 08:00:69:05:a4:60
 [   1.0000000] nsphy0 at mec0 phy 31: DP83840 10/100 media interface, rev. 1
 [   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
 100baseT4, auto
 [   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843
 rev 1
 [   1.0000000] audio0 at mavb0: playback
 [   1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 40ms
 for playback
 [   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
 [   1.0000000] wsbell at spkr0 not configured
 [   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
 [   1.0000000] pci0 at macepci0 bus 0
 [   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc0: interrupting at crime interrupt 8
 [   1.0000000] ahc0: Using left over BIOS settings
 [   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
 [   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc1: interrupting at crime interrupt 9
 [   1.0000000] ahc1: Using left over BIOS settings
 [   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
 [   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
 [   1.0718872] scsibus1: waiting 2 seconds for devices to settle...
 [   3.1341342] sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAN3184MC, 0108>
 disk fixed
 [   3.2255886] sd0: 17366 MB, 30050 cyl, 2 head, 591 sec, 512 bytes/sect x
 35566483 sectors
 [   3.3238294] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.4236492] sd1 at scsibus0 target 2 lun 0: <SEAGATE, ST373307LC, 0007>
 disk fixed
 [   3.5154881] sd1: 70007 MB, 49855 cyl, 4 head, 718 sec, 512 bytes/sect x
 143374744 sectors
 [   3.6150877] sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.9859588] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5401TA,
 3605> cdrom removable
 [   4.0986991] cd0: sync (236.00ns offset 15), 8-bit (4.237MB/s) transfers
 [  11.0327623] WARNING: 1 error while detecting hardware; check system log.
 [  11.1135330] boot device: sd0
 [  11.1580962] root on md0a dumps on md0b
 [  11.2032820] root file system type: ffs
 [  11.2514663] kern.module.path=/stand/sgimips/9.0/modules
 Created mfs /dev (282624 byte, 480 inodes)
 -sh: tset: not found
 erase ^?, werase ^W, kill ^U, intr ^C

 Also, after replacing the 3 files modified in PR#55139 with the 9.0 ones, O2
 boots even from the 9.1 installation CD.

 > boot -f scsi(0)disk(1)rdisk(0)partition(8)sash
 scsi(0)disk(1)rdisk(0)partition(0)NetBSD/9.1-r5k/netbsd-INSTALL32_IP3x
 136992+22896+3248+341792+49584d+4620+6880 entry: 0x8ffa5e50
 11845872+131824 entry: 0x80069000
 [   1.0000000] phys segment: 0x5e000 @ 0x2000
 [   1.0000000] adding 0x5e000 @ 0x2000 to freelist 0
 [   1.0000000] phys segment: 0xb6c000 @ 0x60000
 [   1.0000000] adding 0x6000 @ 0x60000 to freelist 0
 [   1.0000000] skipping 0xb66000 @ 0x66000 (kernel)
 [   1.0000000] phys segment: 0x182000 @ 0xbce000
 [   1.0000000] adding 0x182000 @ 0xbce000 to freelist 0
 [   1.0000000] phys segment: 0xeb84000 @ 0x1400000
 [   1.0000000] adding 0xeb84000 @ 0x1400000 to freelist 0
 [   1.0000000] phys segment: 0x7c000 @ 0xff84000
 [   1.0000000] adding 0x7c000 @ 0xff84000 to freelist 0
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
 2015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights
 reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All rights
 reserved.

 [   1.0000000] NetBSD 9.1 (INSTALL32_IP3x) #0: Thu Oct 12 02:55:22 JST 2023
 [   1.0000000]
 iwama@netbsd-v.led.t3.rim.or.jp:/home/iwama/NetBSD-9.1-sgimips-indy/usr/obj/
 sys/arch/sgimips/compile/INSTALL32_IP3x
 [   1.0000000] total memory = 255 MB
 [   1.0000000] (6848 KB reserved for ARCS)
 [   1.0000000] avail memory = 235 MB
 [   1.0000000] mainbus0 (root): SGI-IP32 [SGI, 0], 1 processor
 [   1.0000000] cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with
 built-in FPU Rev. 1.0
 [   1.0000000] cpu0: 48 TLB entries, 16MB max page size
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative L1 instruction cache
 [   1.0000000] cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
 [   1.0000000] cpu0: 512KB/32B direct-mapped write-through L2 unified cache
 [   1.0000000] crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
 [   1.0000000] crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics
 Display Engine
 [   1.0000000] crmfb0: device unusable if not setup by firmware
 [   1.0000000] mace0 at mainbus0 addr 0x1f000000
 [   1.0000000] lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
 [   1.0000000] com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000:
 ns16550a, working fifo
 [   1.0000000] com0: console
 [   1.0000000] com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000:
 ns16550a, working fifo
 [   1.0000000] macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2
 controller
 [   1.0000000] mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
 [   1.0000000] mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110
 Ethernet, rev 1
 [   1.0000000] mec0: Ethernet address 08:00:69:05:a4:60
 [   1.0000000] nsphy0 at mec0 phy 31: DP83840 10/100 media interface, rev. 1
 [   1.0000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
 100baseT4, auto
 [   1.0000000] mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843
 rev 1
 [   1.0000000] audio0 at mavb0: playback
 [   1.0000000] audio0: slinear_be:16 -> slinear_be:24 2ch 48000Hz, blk 3840
 bytes (10ms) for playback
 [   1.0000000] spkr0 at audio0: PC Speaker (synthesized)
 [   1.0000000] wsbell at spkr0 not configured
 [   1.0000000] macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
 [   1.0000000] pci0 at macepci0 bus 0
 [   1.0000000] ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc0: interrupting at crime interrupt 8
 [   1.0000000] ahc0: Using left over BIOS settings
 [   1.0000000] ahc0: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
 [   1.0000000] ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI
 adapter
 [   1.0000000] ahc1: interrupting at crime interrupt 9
 [   1.0000000] ahc1: Using left over BIOS settings
 [   1.0000000] ahc1: Host Adapter has no SEEPROM. Using default SCSI target
 parameters
 [   1.0000000] ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
 [   1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
 [   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
 [   1.0718763] scsibus1: waiting 2 seconds for devices to settle...
 [   3.1341192] sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAN3184MC, 0108>
 disk fixed
 [   3.2258829] sd0: 17366 MB, 30050 cyl, 2 head, 591 sec, 512 bytes/sect x
 35566483 sectors
 [   3.3242277] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.4240459] sd1 at scsibus0 target 2 lun 0: <SEAGATE, ST373307LC, 0007>
 disk fixed
 [   3.5158872] sd1: 70007 MB, 49855 cyl, 4 head, 718 sec, 512 bytes/sect x
 143374744 sectors
 [   3.6154874] sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers,
 tagged queueing
 [   3.9862513] cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5401TA,
 3605> cdrom removable
 [   4.0999308] cd0: sync (236.00ns offset 15), 8-bit (4.237MB/s) transfers
 [  11.0338882] WARNING: 1 error while detecting hardware; check system log.
 [  11.1148593] boot device: sd0
 [  11.1594195] root on md0a dumps on md0b
 [  11.2079572] root file system type: ffs
 [  11.2561496] kern.module.path=/stand/sgimips/9.1/modules
 [  11.3189794] WARNING: clock lost 10145 days
 [  11.3682037] WARNING: using filesystem time
 [  11.4174354] WARNING: CHECK AND RESET THE DATE!
 Created mfs /dev (282624 byte, 480 inodes)
 -sh: tset: not found
 erase ^?, werase ^W, kill ^U, intr ^C

NetBSD Home
NetBSD PR Database Search

(Contact us) $NetBSD: query-full-pr,v 1.47 2022/09/11 19:34:41 kim Exp $
$NetBSD: gnats_config.sh,v 1.9 2014/08/02 14:16:04 spz Exp $
Copyright © 1994-2024 The NetBSD Foundation, Inc. ALL RIGHTS RESERVED.